Turn any embroidery design into a patch! Apply to caps, makeup bags, sleeves, anything.
Perfect for designs that you don't want bobbin thread on the back of the finished item like a baby onesie or for items you don't want to have needle penetration on like a down jacket or rain coat.
20 patch designs included!
Follow these easy steps for success!
Step 1. Hoop a 4” x 4” hoop with DIME’s Heavy Duty Water Soluble Stabilizer and stitch a patch.
Step 2. Remove the Heavy Duty Water Soluble stabilizer from the patch.
Step 3. Place the Patch Attach rough side facing the back of the patch.
Step 4. Press with a hot iron (wool setting) for 8-12 seconds.
Step 5. Allow to cool. Cut the Patch Attach around the patch. Remove the protective paper.
Step 6. Place the patch, wrong side down, on the fabric. Cover with the Teflon pressing sheet and press for 8-12 seconds.
- 1 roll of 9” x 10 yards of Heavy Duty Water Soluble
- 1 roll of 9” x 3 yards of Patch Attach Fusible Permanent Adhesive
- 20 embroidery designs that fit a 4” x 4” hoop*